Bracket "Viper"

Bracket "Viper" is used for equipping the top gun base weaver (Weaver Rail) for Kalashnikov assault rifles, carbines "saiga", "Vepr-K" (HPE 133), "Vepr-KM" (VPO-136) and similar.

Has 11 slots and is designed for mounting small red dot sights, mounts equipped with a Weaver (weaver) or Picatinny (Picatinny) 21 mm. the Bracket is put in place the sight leaf (on the block). Installation to the factory attachment locations and requires no mechanical intervention, alteration of weapons or special tools.

Installation:
Remove the regular rear sight spring rear sight, receiver cover, gas tube, bolt carrier. Install the bracket so the bottom tab on the bracket coincide with the edge pads of the rear sight from the receiver cover, on the inner side to enclose the nut and tighten the bolt. Using the adjusting screws can be set to desired angle of the bracket If the front lip does not lie on the pad, need to get the nut and grind 1-2 mm in the rear part with a file or stone. It is not recommended to hammer the bracket "Viper" in the groove or excessive pressure.