The sight of ZENIT 1-4x24

Driven optical sight ZENIT 1-4x24 from the Krasnogorsk plant them. S. A. Zverev.

Sealed one-piece aluminum 30 mm case provides a constant geometric parameters of the sight, greater integrity and reliability of the design. The whole structure is stable in time and can withstand much greater loads without loss of settings reconciliations. Additionally, one-piece body of technologically processed accurately made, since the inner polygon surfaces are made "one pass", that is, without changing settings on the machine. 30 mm housing is more robust and reliable installation on the weapon there is a huge number of different mounts from all manufacturers.

ZENIT optics scope 1-4x24

High-quality optical glass with multilayer antireflective coatings applied in the optical part of the sight ZENIT 1-4x24 creates clear and vivid picture, without distortion and with accurate colour. A range of magnifications from 1 to 4 makes it possible easily search aims at low multiplicity 1 with a field of view of almost 36 metres, area or group goals, maintaining a moving target. And precise aiming for the more ratio up to 4. While at low frequency the scope can be used to deep dusk, so as the exit pupil diameter is 20 mm far exceeds the capabilities of the human eye to adapt. Until will see the eye - sight of the ZENIT 1-4x24 will "work".
The riflescope is equipped with a focusing mechanism which allows to adjust the focus within about +/- 2 diopters, the maximum deviation of view with which you can afford to hunt without my glasses, so big adjustments are not needed. The eyepiece provides a comfortable and secure aiming with any weapon, as the point of focus is removed to 134 mm., the diameter of the eyepiece to the eye shields or caps - 46mm. Outer lens diameter - 30mm.

The aiming reticle ZENIT 1-4x24

Reticle ZENIT 1-4x24 located in the focal plane of the lens "in the foreground", so it does not change its angular size relative to the target, that is, varies with the target image when the magnification is changed. At dusk or in low contrast of the background and grid, the center point of the grid can "light up" in red. The brightness is adjustable speed, has 11 levels of brightness, the resistance of each level independently of the other, in case of failure of one, the other levels remain healthy. Red color is the most effective, as well-is perceived by the eye, and red background in the nature practically do not exist. The backlight is powered by a standard battery of type CR2032 with 3 V voltage.

Reconciliation of sight ZENIT 1-4x24

The sight is equipped with large reels of reconciliation that not only provide comfortable bringing weapons to normal battle, but easy and quick introduction of the amendments. The drums are protected from accidental failures, as well as dirt and the elements with metal lids with rubber gaskets. A mechanism used for discrete displacement of the aiming point in increments of 1/2 MoA (MOA), or 14mm/100m distance. The range of such movement is limited by a square with sides not less than 2.6 m at the distance of 100m, which is more than enough for any modern weapons. On the reels the markings in angular minutes. The optical design of the scope does not change the Central position of the crosshair relative to the mesh of the field of view, regardless of the setting. The crosshair is always in the center!

To put the scale of the drum of reconciliation a new zero position, for example, after zeroing for a new weapon or a new distance, Unscrew the mounting screw from slot "a coin" at the end of the drum, remove the drum and install it by aligning the "zero" index mark on the body of the sight ZENIT 1-4x24.

The sight of ZENIT 1-4x24 comes with protective lens covers and an eyepiece, the element of a food of illumination CR2032 3V, cloth for cleaning the optics.

Warranty period of operation of the sight - 12 months, lifetime of 20 years.