The main purpose of the KAPS OPTIK binoculars 842
KAPS OPTIK 8х42 - all-weather binoculars with excellent optical characteristics, combined with small dimensions. Excellent protection of the binoculars allows you not to worry for the safety of the optics during operation, even in adverse weather conditions (rain, snow, fog). It should also be noted that the binoculars are able to withstand short-term immersion in water to depths up to 1 meter.
The diameter of the lenses 42 mm in conjunction with the full enlightenment of the surfaces of all optical elements allows to observe what is happening even in low light, for example, at dusk or indoors. To commend the ability of the binoculars will be able the hunting, fishing, active outdoor recreation, as well as tourists and travelers. The minimum distance for observation, accounting for only 2 m, allows to consider in detail the objects that are in close proximity.
The optical design is built with the use of Roof-prisms, which are made of a special glass type Bak-4 phase correction coating based on the deposition of silver. This allowed to significantly increase the light transmission of the glass. High contrast and smooth the image of the remote object across the field of view provide a set in the eyepieces of the binoculars aspherical lenses.
Key features of the KAPS OPTIK binoculars 8х42
- Magnification 8x binoculars
- The diameter of the lenses 42 mm
- Multi-coated optical elements
- The optical design of binoculars based on the Roof-prisms
- Prisms are made from eco-friendly glass VAK-4 without impurities lead and arsenic
- Aspherical lenses provide a smooth image across the entire field of view
- Eye relief - 16mm
- Diopter adjustment of the right eyepiece (with the ring on the eyepiece)
- Rotating eyecups rubber
- Interpupillary distance is adjustable within wide limits
- Fully waterproof and shockproof and housing
- The drum mechanism Central focusing large diameter
By phone (495) 989-10-56 the experts of our online store , you can find more information about the technical characteristics and major design features of the KAPS OPTIK binoculars 8х42. You can also post your question on the website in a special form and we will get back to you.
Design features of the KAPS OPTIK binoculars 8х42
The body of the binoculars KAPS OPTIK 8х42 made of aluminum alloy, has good resistance to mechanical stress and protects the optics during operation. Rubberized coating effectively absorbs the energy of impacts even with the fall of the device with small height and makes binocular absolutely non-slip in wet hands. Nitrogen-filled housing effectively prevents the deposition of condensate on the inside of the lenses at sharp fluctuations of temperature. With binoculars out from a warm house into the bitter cold, and the optics will not fog up.
Kaps Optik binoculars 842 has a large exit pupil (16mm), which is a good condition to conduct observations of people who use glasses. Binoculars do not have to lean close to the eyes. In addition, the possibility of diopter adjustment of the right eyepiece will allow is to set the optical parameters of the binocular, based on the individual.
The mechanism of Central focusing is smooth running, focusing on distant objects is carried out by rotation of the drum, the impressive size of which allow you to manipulate the settings even in winter gloves. In the construction of the Kaps Optik binoculars 842 provides the possibility of using a tripod (sold separately). Thus, it is possible to get rid of jitter, especially when observed at large distances.
- Kaps Optik binoculars 8х42
- Warranty card
- Caps for lens and eyepieces
- Neoprene wide padded shoulder strap
- Polymer hard case.
- User manual
Technical characteristics of the KAPS OPTIK binoculars 842
Kaps Optik 8х42
|Optical scheme||Prism Roof|
|Light lens diameter, mm||42|
|The field of view, °||7,2|
|Field of view m at 100m.||126|
|The removal of exit pupil, mm||16|
|Exit Pupil Diameter, mm||5,2|
|Minimum focusing distance, m||2|
|Physical and operational characteristics|
|The material of the prisms||Glass, WAC-4|
|Case material||Aluminum alloy|
|The coverage of the case||Rubberized|
|Tripod socket 1/4"||There|
|Aspherical lens: ||There|
|Overall dimensions in packing, mm ||127 x 138 x 54|
|Lens diameter (mm)||42|
|Field of view (deg)||7.2|
|Field of view (m/1000m)||126|
|Exit pupil diameter (mm)||5.2|
|Eye Relief (mm)||16|
|Close focus (m)||2|
|Diopter adjustment, DPTR||-4/+4|
|Optical designs||Roof prism|
|Case material||aluminum alloy|
|Tripod socket 1/4"||Yes|
|Country of origin|
|Manufacturer's warranty (years)||1|
|Dimensions (mm)||127 × 138 × 54|
|Package dimensions, place 1 (mm)||190 × 165 × 85|
|Net weight (kg)||0.65|
|Gross weight 1 (kg)||1.02|
|Operating temperature, °C||-10 — 40|
|Interpupillary distance, mm||55 — 75|