The main purpose of DTK flash suppressor "Night 2" for the AK-74/saiga MK (Tactics-Tula)
DTK (muzzle brake-compensator) with flash Hider (PG) "Night 2" for the AK-74/saiga MK (Tactics-Tula) is a muzzle attachment for a firearm on the basis of AK. This product has a standard thread М24х1,5 and is suitable for most military and hunting weapons "of the family AK" caliber 7,62x39, 5,45h39mm, .223 REM/5,56х45 mm NATO. These include hunting rifles, the saiga MK saiga MK-03 and AK-74, AK-74M, AKSU, AK-101...-105 and similar weapons. When you install the adapter on М14х0,the nozzle 75 can be mounted on AK47, AK74, AKM, AKS, their hunting variations, VPO-133/-136.
DTK "Night 2" for the AK-74 better control of the pistol, greatly compensates the recoil at the moment of shot, and minimizes the tilt of the trunk to the right and up. When mounted casing is almost completely suppressed muzzle flash and the expansion of the propellant gases to the sides. It also reduces the brightness of the flash due to the exhaust gases. The probability of unmasking, and of blinding the shooter when shooting at dusk or night.
Features of choke tube "Night 2" with DTK and flash Hider for AK-74/saiga (Tactics-Tula)
- Installation in carbines saiga MK/MK-03, AK-74, AK-74M, AKSU, AK-101 -105...
- Chemical oxidation, an additional polymer coating
- Regular thread М24х1,5mm
- DTK is active (partition) and reactive (hole) type
- Compensates the recoil and pull the barrel of the gun
- Additional cover "Nights" to successfully suppress the flash at the exit of the powder gases
- Can be used in conjunction with night vision when shooting in twilight and at night
Design features flame "Night 2" on AK-74/saiga MK
Flame trap "Night 2" on AK-74/saiga MK is installed on a standard thread arms without any adaptors, which significantly improves the reliability, durability and safety of the product. Steel muzzle brake compensator (DTK) has 6 chambers with baffles and holes for the distribution and venting (installation option DAY). It is designed for maximum use of propellant gases to stabilize the barrel and recoil compensation.
When you need maximum concealment, and when the night optics is applied to the casing of the flash Hider that screws onto the DTK, It's 2 extra camera afterburners, providing suppression of flare (option NIGHT). The casing is made of aircraft aluminum (alloy D16T marks) and is able to withstand high temperature loads. If you have any questions on purpose, mounted on weapon, order and buy flash Hider, AK-2 – call the experts of our online store by phone (495) 989-10-56. All questions can be asked directly on the site, it is enough to fill a small and convenient form.
It is IMPORTANT! When mounted casing the shooting prohibited!
The sequence of installation on the gun
- Unload the rifle, remove the magazine, put the safety on and make sure that no cartridge in the chamber
- DTK to screw on the barrel until spring loaded lock, after removing a regular muzzle attachment.
- To fix the focus
- Be SURE to check the alignment of the barrel and DTK. If deviations of alignment operation of weapons is prohibited!
- Screw the casing of the flame arrester to the external thread DTK until it stops. Fix it with Allen screws (wrench included)
- Install the camera cover of the afterburner.
This product when dressed casing has a resemblance to PBS (the adaptation for silent shooting). Technically and structurally, the flash Hider has nothing to do with these devices and manufactured in full compliance with the norms of the Federal law "On weapons"
When mounted casing is prohibited shooting bursts!
- Flame trap "Night 2" on AK-74 – 1 PC.
- Additional cover "Night" - 1 PC.
- Case cover – 1 piece
- G-shaped key – 1 PC.
- Packaging-the tube
Technical features of choke tube "Night 2" with DTK and flash Hider for AK-74/saiga (Tactics-Tula)
Muzzle attachment "Night 2" with DTK and flash Hider for AK-74/saiga
Fastening on the weapon
Removable: cut the barrel, thread 24х1,5
Type of flame arrester
Type muzzle brake compensator
Active/reactive (6 cameras)
The casing of the flame arrester "Night"
Designed for weapons
The AK-74, AK-74M, AKSU, AK-100-105, "saiga-MK" use 01-03
Physical and operational characteristics
Flash Hider – steel 45, casing – aluminum alloy D16T
Assembled dimensions, mm
LLC "Taktika-Tula", Tula, Russia
|Case material||aluminum alloy, steel|
|The coverage of the case|
|Country of origin||Russia|
|Manufacturer's warranty (years)||1|
|Package dimensions, place 1 (mm)||185 × 48 × 48|
|Gross weight 1 (kg)||0.57|