Your question
Contact us
Your name
Phone number
Message topic
Your question

Muzzle Brake NIGHT,for saiga 410

Internal code: 6949
Are available
Only 1 left in stock
7,300 Р To order   items
Approx. 103 USD

The main purpose of DTK flash suppressor "Night" for saiga 410 (Tactics-Tula)

DTK (muzzle brake-compensator) with flash Hider "Night" for saiga 410 (Tactics-Tula) has a dual application. Made on the basis of flame arrester "saiga 410 SVD", it very effectively suppresses the flash of the powder gases when fired. Slit for discharging the gases thus produced to reduce recoil, to compensate for "bounce" of weapons and the disposal, particularly when the tempo of shooting. In addition, the flash suppressor (without the shroud, the variant "Day") gives the hunting weapons special style and resemblance to the legendary SVD.

In the "night", that is, with screwed cover, flash Hider almost completely extinguishes flame and diverts powder gases forward in the direction of the shot. For this outer chamber there is a special hole. In this mode, the flash suppressor can be used in twilight and even at night, using not only ordinary optical sights, but NVG (night vision sight). This modification of the flame arrester can be installed on any modification of the hunting carbine "saiga", produced under the cartridge .410х76 mm R (saiga 410, saiga-410С saiga-410К and so on). Easy to install and quick removal will allow you at any time to equip your weapon this indispensable fixture.

Features of choke tube "Night" with DTK and flash Hider for "saiga 410" (Tactics-Tula)

  • The possibility of installation on any modification of the "saiga 410"
  • Mount for weapons without additional adapters or couplings
  • Gives the weapon a special appearance and likeness to the Dragunov
  • Left regular thread fine 15х0,75 for reliable, accurate and rugged mounting fixtures
  • You do not require an additional tool (wrench for tightening – supplied), as well as rearrangements and modifications of weapons or articles
  • Successfully suppresses the flash when shooting
  • Offsets some of the recoil (reactive type), reduces vertical and lateral withdrawal of the barrel of the gun
  • Flash Hider made of steel, suitable for long time operation
  • Cover "Night" - from aircraft aluminum D16T
  • Chemical oxidation, an additional polymer coating
  • Allows you to use night vision when shooting at night
  • Increases the length of the gun on the 140 mm

Design features flame "Night" to "saiga 410"

Flame trap "Night," "saiga 410" installs on standard thread arms without any adaptors, which significantly improves the reliability, durability and safety of the product. Steel flash Hider screws onto the barrel place the nozzle on the gun (threaded connection 15х0,75 mm HL) using open-end wrench (included). This version of "the Day" - weapons fitted with an effective muzzle brake / compensator (muzzle brake-compensator) and flash Hider with an open-type chamber. Improved control of the weapon when firing, significantly reduced the withdrawal of weapons from the line of sight. Side slit divert propellant gases sideways, reducing the danger of temporary blindness arrow.

Additional housing is a flash Hider with the camera closed. It screws onto the external thread of DTK (for convenience, there is a convenient notch for hands). This cover puts the arrester in a version of "Night". It almost completely suppresses the bright flash of the powder gases, taking them through the special perforations. With this flash suppressor you can use night vision sights operating on electron-optical converters (EOC), for which a bright flash is dangerous and can lead to the roll calibration, and even damage to the device. Have questions about the appointment, mount weapons, technical and operational characteristics, the purchase and delivery of the flame arrester "Night" saiga 410 – please contact the experts of our online store by phone (495) 989-10-56 . In the item card there is a special tab where you can read or leave reviews about the product.


This product when dressed casing has a resemblance to PBS (the adaptation for silent shooting). Technically and structurally, the flash Hider has nothing to do with these devices and manufactured in full compliance with the norms of the Federal law "On weapons"

When mounted casing is prohibited shooting bursts!

The installation sequence

  1. Unload the rifle, remove the magazine and ensure that no cartridge in the chamber
  2. To deliver the weapon to the fuse and check again, whether the weapon is discharged
  3. In the presence of the choke tube to dismantle it
  4. Screw the flash Hider on the threads on the muzzle without much effort (note that in the modification thread left with small increments)
  5. Tighten the flash suppressor with a key
  6. Be SURE to check the alignment of the barrel and flash suppressor. If incorrect operation of weapons is prohibited!
  7. Screw the cover on the external thread of the flash suppressor until it stops.

Package includes:

  • Flash suppressor – 1 PC.
  • Additional cover "Night" - 1 PC.
  • Rozhkova key – 1 PC.
  • Packaging-the tube

Technical features of choke tube "Night" with DTK and flash Hider for "saiga 410" (Tactics-Tula)

Technical data

Muzzle attachment "Night" with DTK and flash Hider for "saiga 410"

Fastening on the weapon

Removable: cut the barrel, thread 15х0,75 Leo.

Type of flame arrester

Open/closed type

Type muzzle brake compensator

Jet type

Additional equipment

The casing of the flame arrester "Night"

Designed for weapons

Saiga 410, saiga-410С saiga-410К

Physical and operational characteristics


Flash Hider – steel casing – aluminum alloy D16T


Black, matte



Dimensions, mm


Weight, kg



LLC "Taktika-Tula", Tula, Russia

Case material
Country of origin
Manufacturer's warranty (years)
Dimensions (mm)
142 × 4 × 7
Package dimensions, place 1 (mm)
217 × 58 × 58
Net weight (kg)
Gross weight 1 (kg)
Part manufacturer